5-Axis CNC Wire Cut EDM
CW-10
CW-10
MODEL | CW-10 | |
MACHINE UNIT SPECIFICATION | ||
| Machining method | Submerge / Flushing | |
| Max. workpiece size (W x D x H) | mm | 680x420x150 |
| Max. workpiece weight | kg | 250 |
| X, Y axes travel | mm | 300×200 |
| Z axis travel | mm | 150 |
| U, V axes travel | mm | ±30x±30 |
| X-Y axes feed rate | mm/min | Max. 900 |
| Best surface roughness | µm | Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor | |
| Wire diameter (standard) | mm | Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min | 0-15 |
| Wire tension | gf | 200-2500 |
| Max. taper angle | degree | ±15°/80 |
| Max. wire bobbin weight | kg | 6 |
| Outside dimensions (W x D x H) | mm | (S)850x573x375 (F)920x573x400 |
| Machine weight | kg | 1500 |
WORKING FLUID SUPPLY UNIT | ||
| Tank capacity (liter) | l | 480 / 420 |
| Filter element | Paper filters | |
| Ion exchange resin | l | 15l |
| Conductivity control system | Standard | |
| Fluid temperature control (With coolant) | Auto. (optional) | |
| Outside dimensions (W x H x D) | mm | (S)1100x1400x1290 (F)950x1400x1290 |
| Net weight (without water) | kg | 200 |
POWER SUPPLY UNIT | ||
| Circuit system | Power MOS transistor | |
| Max. outpt current | A | 25 |
| Voltage select | V | 145 |
| IP select | 10 | |
| Off time select | 50 | |
CNC UNIT | ||
| I/O device | Keyboard, RS-232C, CF CARD | |
| Display type | 15″LCD-TFT | |
| Control system | 32 bit, 1-CPU, closed loop software servo system | |
| Control axis | X, Y, U, V, Z | |
| Min. setting unit | mm | 0.001 |
| Max. command value | mm | ±9999.999 |
| Interpolation | Linear / Circular | |
| Command system | Abs. / Incl. | |
| Machining feed control | Servo / Const. Feed | |
| Scaling | 0.001~9999.999 | |
| Auto 2nd cut system | Re-trace and auto changed machining data | |
| Machining condition memory | 0-9999 | |
| Outside dimensions (W x H x D) | mm | 600x870x1850 |
| Total AC power input | KVA | 3Ø220V ±10% / 13KVA |
MODEL | CW-30 | |
MACHINE UNIT SPECIFICATION | ||
| Machining method | Submerge / Flushing | |
| Max. workpiece size (W x D x H) | mm | 780x500x250 |
| Max. workpiece weight | kg | 500 |
| X, Y axes travel | mm | 400x300 |
| Z axis travel | mm | 250 |
| U, V axes travel | mm | ±50x±50 |
| X-Y axes feed rate | mm/min | Max. 900 |
| Best surface roughness | µm | Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor | |
| Wire diameter (standard) | mm | Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min | 0-15 |
| Wire tension | gf | 200-2500 |
| Max. taper angle | degree | ±15°/80 |
| Max. wire bobbin weight | kg | 6 |
| Outside dimensions (W x D x H) | mm | (S)970x719x510 (F)1040x719x450 |
| Machine weight | kg | 2200 |
WORKING FLUID SUPPLY UNIT | ||
| Tank capacity (liter) | l | 690 / 420 |
| Filter element | Paper filters | |
| Ion exchange resin | l | 15l |
| Conductivity control system | Standard | |
| Fluid temperature control (With coolant) | Auto. (optional) | |
| Outside dimensions (W x H x D) | mm | (S)1100x1570x1290 (F)950x1400x1290 |
| Net weight (without water) | kg | 250 |
POWER SUPPLY UNIT | ||
| Circuit system | Power MOS transistor | |
| Max. outpt current | A | 25 |
| Voltage select | V | 145 |
| IP select | 10 | |
| Off time select | 50 | |
CNC UNIT | ||
| I/O device | Keyboard, RS-232C, CF CARD | |
| Display type | 15"LCD-TFT | |
| Control system | 32 bit, 1-CPU, closed loop software servo system | |
| Control axis | X, Y, U, V, Z | |
| Min. setting unit | mm | 0.001 |
| Max. command value | mm | ±9999.999 |
| Interpolation | Linear / Circular | |
| Command system | Abs. / Incl. | |
| Machining feed control | Servo / Const. Feed | |
| Scaling | 0.001~9999.999 | |
| Auto 2nd cut system | Re-trace and auto changed machining data | |
| Machining condition memory | 0-9999 | |
| Outside dimensions (W x H x D) | mm | 600x870x1850 |
| Total AC power input | KVA | 3Ø220V ±10% / 13KVA |
MODEL | CW-40 | |
MACHINE UNIT SPECIFICATION | ||
| Machining method | Submerge / Flushing | |
| Max. workpiece size (W x D x H) | mm | 880x500x250 |
| Max. workpiece weight | kg | 550 |
| X, Y axes travel | mm | 500x300 |
| Z axis travel | mm | 250 |
| U, V axes travel | mm | ±50x±50 |
| X-Y axes feed rate | mm/min | Max. 900 |
| Best surface roughness | µm | Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor | |
| Wire diameter (standard) | mm | Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min | 0-15 |
| Wire tension | gf | 200-2500 |
| Max. taper angle | degree | ±15°/80 |
| Max. wire bobbin weight | kg | 6 |
| Outside dimensions (W x D x H) | mm | (S)1070x719x480 (F)1140x719x450 |
| Machine weight | kg | 2400 |
WORKING FLUID SUPPLY UNIT | ||
| Tank capacity (liter) | l | 830 / 420 |
| Filter element | Paper filters | |
| Ion exchange resin | l | 15l |
| Conductivity control system | Standard | |
| Fluid temperature control (With coolant) | Auto. (optional) | |
| Outside dimensions (W x H x D) | mm | (S)1150x1820x1360 (F)950x1400x1290 |
| Net weight (without water) | kg | 260 |
POWER SUPPLY UNIT | ||
| Circuit system | Power MOS transistor | |
| Max. outpt current | A | 25 |
| Voltage select | V | 145 |
| IP select | 10 | |
| Off time select | 50 | |
CNC UNIT | ||
| I/O device | Keyboard, RS-232C, CF CARD | |
| Display type | 15"LCD-TFT | |
| Control system | 32 bit, 1-CPU, closed loop software servo system | |
| Control axis | X, Y, U, V, Z | |
| Min. setting unit | mm | 0.001 |
| Max. command value | mm | ±9999.999 |
| Interpolation | Linear / Circular | |
| Command system | Abs. / Incl. | |
| Machining feed control | Servo / Const. Feed | |
| Scaling | 0.001~9999.999 | |
| Auto 2nd cut system | Re-trace and auto changed machining data | |
| Machining condition memory | 0-9999 | |
| Outside dimensions (W x H x D) | mm | 600x870x1850 |
| Total AC power input | KVA | 3Ø220V ±10% / 13KVA |
MODEL | CW-50 | |
MACHINE UNIT SPECIFICATION | ||
| Machining method | Submerge / Flushing | |
| Max. workpiece size (W x D x H) | mm | 1000x690x300 |
| Max. workpiece weight | kg | 800 |
| X, Y axes travel | mm | 600x400 |
| Z axis travel | mm | 300 |
| U, V axes travel | mm | ±60x±60 |
| X-Y axes feed rate | mm/min | Max. 900 |
| Best surface roughness | µm | Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor | |
| Wire diameter (standard) | mm | Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min | 0-15 |
| Wire tension | gf | 200-2500 |
| Max. taper angle | degree | ±15°/80 |
| Max. wire bobbin weight | kg | 10 |
| Outside dimensions (W x D x H) | mm | (S)1136x900x530 (F)1272x862x480 |
| Machine weight | kg | 2800 |
WORKING FLUID SUPPLY UNIT | ||
| Tank capacity (liter) | l | 1215 / 420 |
| Filter element | Paper filters | |
| Ion exchange resin | l | 15l |
| Conductivity control system | Standard | |
| Fluid temperature control (With coolant) | Auto. (optional) | |
| Outside dimensions (W x H x D) | mm | (S)1200x1800x1470 (F)950x1400x1290 |
| Net weight (without water) | kg | 280 |
POWER SUPPLY UNIT | ||
| Circuit system | Power MOS transistor | |
| Max. outpt current | A | 25 |
| Voltage select | V | 145 |
| IP select | 10 | |
| Off time select | 50 | |
CNC UNIT | ||
| I/O device | Keyboard, RS-232C, CF CARD | |
| Display type | 15"LCD-TFT | |
| Control system | 32 bit, 1-CPU, closed loop software servo system | |
| Control axis | X, Y, U, V, Z | |
| Min. setting unit | mm | 0.001 |
| Max. command value | mm | ±9999.999 |
| Interpolation | Linear / Circular | |
| Command system | Abs. / Incl. | |
| Machining feed control | Servo / Const. Feed | |
| Scaling | 0.001~9999.999 | |
| Auto 2nd cut system | Re-trace and auto changed machining data | |
| Machining condition memory | 0-9999 | |
| Outside dimensions (W x H x D) | mm | 600x870x1850 |
| Total AC power input | KVA | 3Ø220V ±10% / 13KVA |
MODEL | CW-70 | |
MACHINE UNIT SPECIFICATION | ||
| Machining method | Flushing | |
| Max. workpiece size (W x D x H) | mm | 1200x790x300 |
| Max. workpiece weight | kg | 1000 |
| X, Y axes travel | mm | 800x500 |
| Z axis travel | mm | 300 |
| U, V axes travel | mm | ±60x±60 |
| X-Y axes feed rate | mm/min | Max. 900 |
| Best surface roughness | µm | Ra 0.65 |
| Drive motor (X, Y, U, V) | AC Servo Motor | |
| Wire diameter (standard) | mm | Ø0.25 (Ø0.15-Ø0.3) |
| Wire feeding speed | m/min | 0-15 |
| Wire tension | gf | 200-2500 |
| Max. taper angle | degree | ±15°/80 |
| Max. wire bobbin weight | kg | 10 |
| Outside dimensions (W x D x H) | mm | 1492x972x480 |
| Machine weight | kg | 4100 |
WORKING FLUID SUPPLY UNIT | ||
| Tank capacity (liter) | l | 420 |
| Filter element | Paper filters | |
| Ion exchange resin | l | 15l |
| Conductivity control system | Standard | |
| Fluid temperature control (With coolant) | Auto. (optional) | |
| Outside dimensions (W x H x D) | mm | 950x1400x1290 |
| Net weight (without water) | kg | 280 |
POWER SUPPLY UNIT | ||
| Circuit system | Power MOS transistor | |
| Max. outpt current | A | 25 |
| Voltage select | V | 145 |
| IP select | 10 | |
| Off time select | 50 | |
CNC UNIT | ||
| I/O device | Keyboard, RS-232C, CF CARD | |
| Display type | 15"LCD-TFT | |
| Control system | 32 bit, 1-CPU, closed loop software servo system | |
| Control axis | X, Y, U, V, Z | |
| Min. setting unit | mm | 0.001 |
| Max. command value | mm | ±9999.999 |
| Interpolation | Linear / Circular | |
| Command system | Abs. / Incl. | |
| Machining feed control | Servo / Const. Feed | |
| Scaling | 0.001~9999.999 | |
| Auto 2nd cut system | Re-trace and auto changed machining data | |
| Machining condition memory | 0-9999 | |
| Outside dimensions (W x H x D) | mm | 600x870x1850 |
| Total AC power input | KVA | 3Ø220V ±10% / 13KVA |
CNC Wire Cut EDM Molybdenum Wires
MODEL | DW-35 | |
MACHINE UNIT | ||
Work-Tank size (W x D x H) | mm | 930x530x550 |
Work table size (X x Y) | mm | 690x430 |
| X x Y axes travel | mm | 450x350 |
| Z axis travel (by AC Motor) | mm | 400 |
| U x V axes travel (under 50mmH.) | mm | 30x30 |
| Max. work-piece thickness | mm | 400 |
| Max. work-piece size (W x D x H) | mm | 400x350x400 |
| Max. work-piece weight | kgs | 250 |
| The wire bobbin travel | mm | 180 |
| Dia. of molybdenum wire | mm | Ø0.18 |
| Maximum taper angle | Degree | 6 degree under 50mm high |
| Packing dimensions (W x D x H) | mm | 1,685x1,155x2,050 |
| Net weight | kgs | 1,650 |
DIELECTRIC FLUID UNIT | ||
| Capacity of dielectric fluid | l | 100 |
| Dielectric fluid tank size (W x D x H) | mm | 1000x290x340 |
POWER SUPPLY UNIT | ||
| Machining average current | A | 5 |
| Cutting speed | mm2/min | 100~180 |
| Cutting accuracy | mm | ±0.015 |
| Best finish roughness | µm RA | 1.0 |
| Max. power consumption | KVA | 3.0 |
| External dimensions (W x D x H) | mm | 660x610x1,700 |
| Packing dimensions (W x D x H) | mm | 775x730x1,940 |
| Net weight | kgs | 200 |
MODEL | DW-45 | |
MACHINE UNIT | ||
Work-Tank size (W x D x H) | mm | 1,130x690x550 |
Work table size (X x Y) | mm | 750x480 |
| X x Y axes travel | mm | 500x400 |
| Z axis travel (by AC Motor) | mm | 400 |
| U x V axes travel (under 50mmH.) | mm | 30x30 |
| Max. work-piece thickness | mm | 400 |
| Max. work-piece size (W x D x H) | mm | 500x400x400 |
| Max. work-piece weight | kgs | 400 |
| The wire bobbin travel | mm | 230 |
| Dia. of molybdenum wire | mm | Ø0.18 |
| Maximum taper angle | Degree | 6 degree under 50mm high |
| Packing dimensions (W x D x H) | mm | 1,920x1,420x2,000 |
| Net weight | kgs | 1,850 |
DIELECTRIC FLUID UNIT | ||
| Capacity of dielectric fluid | l | 100 |
| Dielectric fluid tank size (W x D x H) | mm | 1000x290x340 |
POWER SUPPLY UNIT | ||
| Machining average current | A | 5 |
| Cutting speed | mm2/min | 100~180 |
| Cutting accuracy | mm | ±0.015 |
| Best finish roughness | µm RA | 1.0 |
| Max. power consumption | KVA | 3.0 |
| External dimensions (W x D x H) | mm | 660x610x1,700 |
| Packing dimensions (W x D x H) | mm | 775x730x1,940 |
| Net weight | kgs | 200 |
