E Series
FEATURES:
Stable, Reliable and More Affordable Than Ever
- 10,000 rpm spindle with ceramic bearings design
- High rigidity ball type guideways on X/Y/Z axes
- High precision ball screws adopted on X/Y/Z axes
- 24T for disk type tool magazine
- Auto tool change time (T-T): 1.8 sec.
- Absolute encoder ATC system
E5
NMV Series
FEATURES:
YCM In-house IDD Spindle
- Symmetrical Head Stock design homogeneously absorbs the thermal expansion and avoids thermal deformation.
- High precision ceramic ball bearing with low centrifugal force, low vibration and low coefficient of thermal expansion.
- Tool unclamping cushion design extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- 12,000 rpm direct-drive spindle features high precision helical springs for excellent balance, suitable for parts machining.
- The optional 8,000 rpm spindle design incorporates gear transmission is capable of reaching 45.04 kgf-m 325.78 lb-ft torque; perfect for casting and titanium machining.
- The optional 10,000 rpm spindle combines with gear transmission for heavy cutting. Even using the small-diameter tools for high speed cutting can achieve refined machining roughness (Spindle cooling system: std.)
High Rigidity Structural Design
- Adopted consistent production process, box guideway type models with high shock absorption and wear resistance, are the best for heavy cutting.
- The rigid body construction makes for uncompromising precision and rigidity.
- Finite Element Method analysis (FEM) is adopted to simulate the structural deformation of the body under various conditions,integrated with YCM hand scrapping skills for box guideways, which ensures the best accuracy and life.
- Boxway design on three axis is suitable for heavy cutting.
- The wide span 650mm Y-axis with rigid dual-wall saddle design fully supports table movement.
- No counter weight on Z-axis provides the best dynamic accuracy.
- High Stability Tool Magazine
- The bi-directional tool selection design takes the shortest random path.
- The standard tool magazine is equipped with 24T, for more machining demands, the tool magazine can be expanded to 30T.
- Absolute encoder and inventor control in ATC improve the tool change time 1.8 sec. only.
- Tool change speed can be adjustable.
- Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
The Z-axis is outside support design
- The best L/W ratio.
- Secure the utmost cutting rigidity.
- The Z-axial movement is very smooth.
FEATURES:
YCM In-house IDD Spindle
- Symmetrical Head Stock design homogeneously absorbs the thermal expansion and avoids thermal deformation.
- High precision ceramic ball bearing with low centrifugal force, low vibration and low coefficient of thermal expansion.
- Tool unclamping cushion design extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- 12,000 rpm direct-drive spindle features high precision helical springs for excellent balance, suitable for parts machining.
- The optional 8,000 rpm spindle design incorporates gear transmission is capable of reaching 45.04 kgf-m 325.78 lb-ft torque; perfect for casting and titanium machining.
- The optional 10,000 rpm spindle combines with gear transmission for heavy cutting. Even using the small-diameter tools for high speed cutting can achieve refined machining roughness (Spindle cooling system: std.)
High Rigidity Structural Design
- Adopted consistent production process, box guideway type models with high shock absorption and wear resistance, are the best for heavy cutting.
- The rigid body construction makes for uncompromising precision and rigidity.
- Finite Element Method analysis (FEM) is adopted to simulate the structural deformation of the body under various conditions, integrated with YCM hand scrapping skills for box guideways, which ensures the best accuracy and life.
- Boxway design on three axis is suitable for heavy cutting.
- The wide span 800 mm Y-axis with rigid dual-wall saddle design fully supports table movement.
- No counter weight on Z-axis provides the best dynamic accuracy.
- High Stability Tool Magazine
- The bi-directional tool selection design takes the shortest random path.
- The standard tool magazine is equipped with 24T, for more machining demands, the tool magazine can be expanded to 30T/40T.
- Absolute encoder and inventor control in ATC improve the tool change time 1.8 sec. only.
- Tool change speed can be adjustable.
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
The Z-axis is outside support design
- The best L/W ratio.
- Secure the utmost cutting rigidity.
- The Z-axial movement is very smooth.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Smooth chip removal.
- Dual chip augers combined with chip conveyor for fast chip disposal (opt.)
NTV Series
FEATURES:
YCM In-house IDD Spindle
- Reduces noise, backlash and vibration issues and maximizes spindle accuracy and life.
- YCM's uniquely designed IDD Spindle ensures direct transmission and is proven to maximize both spindle and tool life under harsh working environment.
- The cooling system for spindle motor seat and spindle makes real time control of spindle temperature.
- The oil-air lubrication system ensures long-term high-speed operation.
Superb Body Structure
- With the unique T-base structure, the machine footprint can be reduced effectively.
- Overhang-free table movement is supported by high-rigidity base to ensure the best dynamic accuracy.
- Dual screw-type chip augers efficiently elevate chip removal rate.
- Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity.
High Reliability Axial Movement
- All axes are equipped with roller type linear guideways to ensure higher dynamic accuracy, durability and rigidity.
- Preload high precision ball screws are directly driven by servo motor will efficiently eliminate axial backlash and vibrations.
- X-axis with 6 guideway blocks fully supports the saddle and efficiently releases loading from the table.
- Y-axis is designed with 3 guideways maintaining exceptional dynamic accuracy.
Efficiency-friendly Design
- Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity.
Without Counter-weight Design
- High response axial control provides smooth movement.
- Low inertia avoids vibration during high speed feed rate.
FEATURES:
YCM In-house IDD Spindle
- Reduces noise, backlash and vibration issues and maximizes spindle accuracy and life.
- YCM's uniquely designed IDD Spindle ensures direct transmission and is proven to maximize both spindle and tool life under harsh working environment.
- The cooling system for spindle motor seat and spindle makes real time control of spindle temperature.
- The oil-air lubrication system ensures long-term high-speed operation.
Superb Body Structure
- With the unique T-base structure, the machine footprint can be reduced effectively.
- Overhang-free table movement is supported by high-rigidity base to ensure the best dynamic accuracy.
- Dual screw-type chip augers efficiently elevate chip removal rate.
- Massive MEEHANITE® casting through FEM analysis offers exceptional damping capacity
- High Reliability Axial Movement
- All axes are equipped with roller type linear guideways to ensure higher dynamic accuracy, durability and rigidity.
- Preload high precision ball screws are directly driven by servo motor will efficiently eliminate axial backlash and vibrations.
- X-axis with 6 guideway blocks fully supports the saddle and efficiently releases loading from the table.
- Y-axis is designed with 3 guideways maintaining exceptional dynamic accuracy.
Efficiency-friendly Design
- The casting rigidity is enhanced through FEM analysis.
- Roller type guideways provides low friction which reduces energy waste.
Z-axis Dual Driven
- Increases the feed rate and acceleration/deceleration.
- High response axial control provides smooth movement.
- Low inertia avoids vibration during high speed feed rate.
- Dual drive system on Z-axis elevates exceptional axial smoothness and machining efficiency, and ensures fine surface roughness.
- Up to 15,000 rpm (HSK A100) spindle is available to meet different machining demands.
NXV Series
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.) .
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T) 1.8 sec.
- Tool Magazine Capacity: 24T
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
Automatic Pallet Change
- Pallet Size: 560 x 410 mm 22.04" x 16.14"
- Table Load Capacity: 120 kg 265 lb
- Distance Between Spindle Nose and Table Top: 25 ~ 475 mm 0.98"~18.7"
- Hole Pattern: M12 x 80 mm x 80 mm M12 x 3.15" x 3.15"
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle ; Oil-air lubrication for 15,000 rpm spindle (opt.).
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Oil-air lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 15,000 rpm spindle (opt.)
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/40T opt.)
- Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
FEATURES:
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- Direct drive provides backlash free, best accuracy, reliability and stability.
- Robust roller linear guideways applied on 3 axes.
- 6 blocks design on X-axis can easily support workpieces weighing
- up to 1,500 kg.
- 4-linear guideways on Y-axis with superior large span ensures the best dynamic balance.
- Rigid dual-wall castings on saddle
- Wide base structure with 10 leveling pads.
- The compact structure enables excellent floor space utilization
IDD Spindle Design: HIGH PRECISION HIGH SPEED
- The unique IDD spindle design offers smooth reliability at high speed.
- Ceramic bearings do not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/48T/60T opt.)
Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T): 1.8 sec.
- Tool Magazine Capacity: 24T (30T/48T/60T opt.)
- Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]
FEATURES:
YCM In-house IDD Spindle
- Tool unclamping cushion extends spindle bearing life by protecting spindle bearing from tool unclamping force.
- Spindle cooling system (opt.) removes heat efficiently and minimizes thermal deformation.
- Ceramic bearings features low inertia mass, low centrifugal force, high rigidity and low coefficient of thermal deformation.
- High precision helical springs features high dynamic balance and low vibration.
- Grease lubrication for 12,000 rpm spindle as a standard.
- Oil-air lubrication for 12,000 / 15,000 rpm spindle (opt.)
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed.
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Absolute encoder ATC system provides high stability and speed.
- Inverter controlled, prevents tool change speed from changing under different power supply frequency.
- Tool change speed can be adjustable for heavy tools.
- Auto Tool Change (T-T) 1.8 sec.
- Tool Magazine Capacity: 24T (30T/48T/60T opt.)
- Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine.
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Coolant shower for efficient chip removal <NXV Series std.>
- Penta chip augers (4 Y-axial 1 X-axial) ensure fluent chip removal prevent chips from piling up. [Quad chip augers (4 Y-axial Chip Conveyor) opt.]
FEATURES:
YCM In-house IDD Spindle
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48 kgf-m 347.19 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36 kgf-m 260.39 lb-ft. (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
High Rigidity Design
- FEM analysis is adopted to ensure the best mass arrangement and rib construction of the machine for constant stability under the intensive load of heavy-duty cutting.
- All axial AC servo motors equipped with Absolute Positioning Encoders, no zero return needed
- Direct drive provides backlash free, best accuracy, reliability and stability.
- High rigidity and high loading linear guideways applied on the three axes.
- 6 slide blocks on X-axis and 4 linear guideways on Y-axis
- No counter weight on Z-axis
- The rigid body construction makes for uncompromising precision and rigidity.
High Stability Tool Magazine
- Auto Tool Change (T-T): 4.2 sec.
- Tool Magazine Capacity: 32T (24T/40T opt.)
- Automatic Tool Magazine Door Design
- Driven by pneumatic cylinder.
- Prevent coolant and chips from entering tool magazine
Brand New Exterior Design
- Full enclosure exterior (including top cover).
- Convertible side window for convenient chip removal.
- Aesthetic rear cover design.
- Smooth chip removal.
- Quad chip augers (4 Y-axial) system ensures fluent chip removal prevent chips from piling up. [with Rear Side Chip Conveyor (opt.)]
TV Series
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Reliable Automatic Pallet Changer System
- Reliable APC system with the unique design of shuttle type mechanism successfully shortens loading and uploading time thus increases efficiency.
- Pallet change time: 25 sec.
- Table Load Capacity: 600 kg
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- The counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
- The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
- Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC system is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
- The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kg-m 347.48 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (opt.).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
- The Y-axis is equipped with 4 guideways to gain the best support and forceflow.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000 rpm high-speed with the maximum of 18.5 kW 25 HP power output and 48.04 kgf-m 347.48 lb-ft torque.
- Spindle speed of up to 10,000 rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Max. spindle power 22 kW 30 HP without gearbox, electric speed shift with spindle motor, maximum torque of 36.03 kgf-m 260.61 lb-ft (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- n Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
- The Y-axis is equipped with 4 guideways to gain the best support and force flow.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000rpm high-speed with the maximum of 15kW/18.5kW 25HP/20HP power output and 48kg-m 347.19lb-ft torque.
- n Spindle speed of up to 10,000rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Spindle power 18.5kW / 22kW 24.8HP/29.5HP without gearbox, electric speed shift with spindle motor, maximum torque of 36kgf-m. (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
FEATURES:
The Best Force Flow T-base Design
- The unique T-base structural design has been awarded a patent from Taiwan, China and the U.S.A. Its overhang free table movement is supported by highly rigid MEEHANITE® castings to ensure the best dynamic leveling accuracy, machining rigidity and durability.
- The long travel of X-axis lies on the top of the base, where the saddle moves along the full stroke; the cross Y-axis saddle supports the work table.
- The T-base rigid structure has full stroke support and do not have overhang problem guarantees the most dynamic leveling accuracy.
High Rigidity Axial Movement
- All axes are equipped with hardened and precision ground integrated square guideway with durable Turcite-B lubrication coating.
- Sophisticated scraper work guarantees the best contact and perfect surface of the components to assure flawless accuracy.
- n Sufficient support areas of all guideways give the best damping capacity and gain the best cutting rigidity.
- All precise ballscrews are pre-tensioned and directly coupled with powerful servo motors to reduce backlash and ensure the best accuracy.
- Inner-rail design on Z-axis ensures smooth movement of the headstock during heavy cutting performance. And the counter weight of Z-axis headstock is secured by guide bar to minimize machining vibration.
- The Y-axis is equipped with 4 guideways to gain the best support and force flow.
Fast & Reliable ATC System
- Number of tool posts in magazine can be selected for 24T/32T/40T.
- The arm type ATC sysstem is driven by roller gear cam to increase the work efficiency.
Humanized Operation Panel
- The swivel operation panel of appropriate height and clear modular switches can be operated easily.
- Clearly display the signals and alarm messages.
- Detachable MPG handwheel is installed for operational convenience.
Hi-Speed, Hi-Power Spindle Design
- Standard gearhead spindle of maximum of 6,000rpm high-speed with the maximum of 15kW/18.5kW 25HP/20HP power output and 48kg-m 347.19lb-ft torque.
- Spindle speed of up to 10,000rpm with IDD (Isolated Direct Drive) design, coupled with oil lubrication that can lower heat deviation, improve spindle accuracy and extend bearing life. Spindle power 18.5kW / 22kW 24.8HP/29.5HP without gearbox, electric speed shift with spindle motor, maximum torque of 36kgf-m. (option).
- The quill type spindle housing is with cooling system to assure the best temperature control of the spindle head, and for the best machining results.
- Deployed with precise angular contact ceramic ball bearings for extra axial and radial rigidity to fit the requirements of heavy cutting.
NSV Series
Isolated Direct Drive Spindle
- The unique IDD spindle with speed of 12,000 rpm / 15,000 rpm (opt.) and ceramic bearings offer low spindle vibration and optimal heat isolation.
- High performance spindle motor of 22 kW 30 HP output
- Result in excellent surface finish while maximizing both spindle and tool life under hard milling conditions.
Built-in Motorized Spindle (Opt.)
- Maximum spindle speed: 20,000 rpm
- Superb spindle cooling system with YCM patent provides minimum spindle vibration.
- Rear bearing floating design
- Micro oil-air lubrication system
- BBT40 double contact spindle taper
High Rigidity Structural Design
- X/Y/Z axes equipped with the roller type linear guideways and large diameter ball screw that maximize aluminum chip disposal during processing
- Extra large delta machine column
- Double-nut ball screw with high performance axial servo motor
- Wide distance between guideways
- Advanced design with reinforced body structure through FEM analysis, the NSV series offers superb cutting performance and reduced vibration to meet the highest machining demand.
Column Mounted Design
- Minimizes the vibration during tool change
- Tool magazine capacity: 30T
- Standard ATC door prevents coolant and chips from entering tool magazine.
High Rigidity Structural Design
- One-piece motor housing
- Large delta machine column and base ensure the highest stability during high speed movement.
- Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
- 45 mm guideways on 3 axes have a super load capacity of up to 700 kg.
- X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to previous model.
- Y-axis guideway span with optimal ratio
IDD PLUS Spindle Design: HIGH PRECISION HIGH SPEED
- The unique IDD spindle design offers smooth reliability at high speed.
- Ceramic bearings do not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
Reliable Automatic Tool Change
- Auto tool change(T-T): 1.8 sec.
- 24T Disk type
- 30T Disk type / 48T Chain type (opt.)
Efficient Chip Removal System
- Equipped with triple-chip augers as a standard.
- Dual-chip augers as an option.
Download Catalog
High Rigidity Design
- One-piece motor housing
- Large delta machine column and base ensure the highest stability during high speed movement.
- Advanced FEM analysis strengthens the structure while reduces the weight to provide the best cutting rigidity.
- 3 axes equipped with 45 mm roller guideways and large-diameter ball screws maximize chip disposal during processing.
- X-axis equipped with 6 slide blocks increases rigidity by 50%, compared to previous model.
- Y-axis guideway span with optimal ratio
- Its table can easily support workpieces weighing up to 1,000 kg.
IDD PLUS Spindle Design HIGH PRECISION HIGH SPEED
- The unique IDD spindle design offers smooth reliability at high speed.
- Ceramic bearings not just boost the spindle speed, but also achieve high axial and radial rigidity, which fulfill strict machining requirements on heavy cutting, drilling and tapping.
- Spindle cooling unit decrease thermal deformation on spindle headstock.
- Micro oil-air lubrication system minimizes thermal deformation and prolongs spindle life that are well-suited for die & mold industry.
Reliable Automatic Tool Change
- Auto tool change(T-T): 1.8 sec.
- 24T Disk type as a standard
- 30T Disk type / 48T Chain type (opt.)
Efficient Chip Removal System
- Equipped with triple-chip augers as a standard.
- Dual-chip augers as an option.
Isolated Direct Drive Spindle
- The unique IDD spindle with speed of up to 12,000 rpm and ceramic bearings offer low spindle vibration and optimal heat isolation
- High performance spindle motor of 22 kW 30 HP output
- Result in excellent surface finish while maximizing both spindle and tool life under hard milling conditions.
High Rigidity Structural Design
- X/Y/Z axes equipped with the stable linear guideways and wide ball screw that maximize aluminum chip disposal during processing.
- Extra large delta machine column
- Double-nut ball screw with high performance axial servo motor
- Wide distance between guideways
- Advanced design with reinforced body structure through FEM analysis, the NSV series offers superb cutting performance and reduced vibration to meet the highest machining demand.
Column Mounted Design
- Minimizes the vibration during tool change
- Tool magazine capacity: 30T
- Standard ATC door prevents coolant and chips from entering tool magazine.
Efficient Chip Removal System
- Quad-chip auger (std.) for large amount of aluminium chips removal
